Err

Millpledge Veterinary UK Account Application
Please complete the following form to apply for and set up an account with Millpledge Veterinary UK.
Please note, the online account facility and purchasing through this web site is strictly for the veterinary professional within the UK, Northern Ireland & Eire.
If you would like to set up an account with Millpledge Veterinary for supply outside of the UK please visit http://www.millpledge.com and first select your global region and follow the same route to the account application form.
Due to the nature of the products available from Millpledge Veterinary, each and every account application is handled offline, an account invitation will follow should you meet the required professional veterinary criteria.
Data captured within the form will not be passed on to any other party.
Thank you for your interest in Millpledge Veterinary and we look forward to being of service.
Register
Veterinary Supplies
Search Your Cart   Continue Shopping

Aniset™ L/A IV set 2 & 4 Spike

Size :
Aniset™ L/A IV set 2 & 4 Spike
  • Aniset™ L/A IV set 2 & 4 Spike
  • Aniset™ L/A IV set 2 & 4 Spike
  • Aniset™ L/A IV set 2 & 4 Spike

Large Animal IV Fluid Administration Set  

  • ANISET L/A 2 SPIKE™ - with two tube, clamp and insertion spike fluid delivery assemblies, for attaching two IV. fluid containers at a time.
  • ANISET L/A 4 SPIKE™ - with 4 tube, clamp and insertion spike fluid delivery assemblies, for attaching four IV. fluid containers at a time.
  • Each set allowing for high volume or long period IV. fluid administration to large animals, particularly horses from 2 or 4 containers of IV. fluids.
  • Clear large bore tubing (4.8mm i.d.) and robust connecting components used throughout.
  1. |Features|
    All insertion spikes are long and sharp pointed with filtered vent caps and come complete with pre-threaded black reusable/adjustable  plastic ties for attaching to appropriate slot/holes in port flaps of IV. fluid bags to give greater security.


    In the 2 Spike set the delivery arm assembly, the two spikes are attached to two different lengths of large bore tubing, one of 13cm and the other of 23cm meeting at a ‘Y’ connector positioned 20cm above the drip chamber.  This allows one or two fluid containers to be attached higher than the other.  On each of these lengths of tubing arms is an easy press ‘click-lock’, fluid flow shut off clamp.
      In the 4 Spike set there is an additional delivery arm assembly attached by a ‘Y’ connector, the additional delivery arm set is a repeat of the 2 Spike model but with two differing lengths of delivery tubing below the top ‘Y’ Connector, an additional ‘Y’ connector positions these assemblies ‘Y’ connectors approx. 12cm and 17cm above the drip chamber respectively.  The differences in tube lengths allowing for 4 IV fluid containers to be linked together and positioned in a cascade formation.
    Below either the 2 Spike or 4 Spike delivery assemblies is a unique ‘free rotating pivot connector’ positioned 3cm above the 100 ml graduated, burette style drip chamber, that allows the drip chamber and remainder of the IV set to rotate freely below the fluid delivery containers.  This provides for easy viewing and operation of the drip chamber as well as reducing twisting of the lines.  It also makes unravelling the line a lot easier should it occur.
      The large clear, 100ml graduated, drip chamber has a recessed ‘injection site’ and a capped bacterial filter air inlet vent on top. Inside, the large bore drip spout is capable of handling a high ‘drip count’ fluid flow rate.  There is a blue plastic ‘float’ disc which drops to bottom of chamber when empty, as a seal, preventing pull through of air by the dropping flow of fluid in the emptying pathway tubing below.
      Connected below the drip chamber is a ‘spiral’ of 65cm of the highest quality polyurethane tubing, crystal-clear, inbuilt permanent memory with gentle extension and recover spring action (250cm lightly extended, 300cm stretched).  Immediately below this spiral tube is a large blue C-Clamp to shut off flow and a sturdy easy grip (raised ribbed head) screw clamp flow rate adjuster, positioned just above a pliable tubing joint at the end of the spiral.  From this joint 30cm tubing connects on to a ‘Y’ style latex free injection port.  Also on this section of tube is the handy 'mane grip' tie assembly.
      Finally the set terminates with a 15cm run of tubing with a rotating male luer lock and filtered end cap, that allows the set to be charged steadily without spill with the end cap in place.
  2. |Videos|Millpledge AniSet L/A
    - Large Animal IV Fluid Set