1 Hassle free, easy prime 15dpm Millpledge standard drip chamber incorporates our long super sharp spike with 3 vents (2 for fluid and 1 for air) to provide for the smooth and fast transition of fluids from either bag or bottle, made possible when you use the our ergonomically designed flip cap air vent with its in-built bacteria filter.
The spike is mounted onto the popular easy to squeeze crystal-clear filtered drip chamber.
The drip chamber incorporates the 'Ani-Chamber Tag™', a unique drip chamber tie for securing the spike and drip chamber into the base of the bag or bottle to prevent it being ‘pulled out’.
2 Directly below the chamber is the 360° in line, low friction swivel assembly for free patient movement without (under most circumstances) the need for additional rotating ceiling devices.
Then follows Millpledge’s own AniMill™precise V-Bed Roller Clamp for exacting fluid flow, with the positive click-in ‘excess’ or ‘hang it up’ tube parking slot. This is ideal for use during preparation following set priming prior to connecting to the accessory or device at the distal end of the IV set, keeping the distal end free from possible contaminants.
4 Our versatile and strong AniSet R-Clamp with two tension positions for immediate ‘On/Off’ control of fluids.
5 Two Millpledge manufactured ‘Safety Ring’ injection sites with silicon injection plugs. Both have Millpledge’s unique outer safety protector ring which helps avoid needle stick injuries.
5a Proximal with Finger Guard Plate
6 Over 10’ 2” (3.1m) of Aniset Anti-Kink® flexible coiled tubing together with the straight connecting lengths provides a generous 12’ 6” (3.81m) total reach.
7 The Ani-Which-Way Mane Tie – our latest design of mane tie! Soft but strong PVC accurately die-cut and shaped providing, as it suggests: Ani-Which-Way bespoke mane tie assembly for securing the distal end of the IV set close to the catheter hub to reduce the risk of catheter kinking and displacement and unexpected withdrawal. Our tie offers the widest variety of fixing positions to suit the variety of animal patients; all ensure uninterrupted line flow and total security once in situ.
Every pack includes full instructions and a variety of options to suit your preferred securing method.
8 Luer Lock fitting for a secure connection of an Aniset extension, Aniset T-connector or Anicath L/A catheter.
9 Aniset® Fluid priming cap completes the line, which allows the set to fill automatically without the removal of the end cap. Expels all the air but none of the fluid. Prevents wasted medication, maintaining a clean and dry preparation area.